Barrel O' Fish Spa

Feature:
The case is made of high-quality ZL aluminum alloy withstreamline design, heat-dissipation is more effctive. Driven by electrical magnetic motor, adpot straight-line reciprocal motion to produce air and more reasonalbe in structure. Adopt SF3 new type wearable material for the cylinder and piston, which is of low power consumption, large air output and high ari pressure. Non-oil lubricating design, the compressed air is purified. Phosphorize disposittion,regular coloring and adhesive strength.

Application:
It is used for planting aquarium plant,aerating for seafood in hotels,restaurants,seafood booths,and feeding pool etc,it

Specification:
Voltage : 220V / 50Hz
Power : 80W
Output : 120 LPM 
Weight: 7 Kgs                     
Dimension: 22 x 29 x 21cm

Additional Information:

• Delivery Time: 2 days

RESUN LP-100
Ideal for adding oxygen into aerobic wastewater systems in non-sewered areas. Also used for pond aeration into a fish pond which is very important for fish health, particularly in densely stocked koi fish ponds and in the summer months when oxygen levels decline. Fish will become visibly more active in an oxygen-rich pond

Installation hints:
Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers. 


FEATURES
Electromagmetic linear diaphragm technology Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump cast aluminium body with Automatic thermal cut-out overload protection
Must be set-up above the water level


Voltage/Wattage: 240V / 100W
Cable length: 1.5m
Max pressure: 0.042 mPa / 0.42 bar / 420 mbar / 6.1 psi
Max air output: 8400L/hr (140 Litres/minute) 
Air pump outlet diameter: 20mm


Important: Rated IPX4 (meaning - Should be placed in a low dust environment but will tolerate rain and light sprinkling) 
Maximum water depth for placed airstones or air diffuser: 4.0m
Supplied with a plastic 33 outlet x 46mm barbed manifold to suit 4mm - 8mm silicon air line
Air Pump dimensions: 270mm(L)x200mm(W)x230mm(H) 
Weight: Air Pump, 6.6kg. Cartoned pump: 7.31kg

Additional Information:

• Delivery Time: 2 days

Micro regulator is available in AC/DC operation mode
The air output can be adjusted at ones desire
Multi-level muffling design, low noise, large air output and high pressure
Intelligent micro computer control system and protective circuit of battery
Battery can be charged when the pump is connected with AC power supply
Change automatically to DC when AC if off
The DC power can work up to8 hours when the AC power turns off

Specifications:
Voltage / Frequency: 220V - 240V & 50/60Hz
POWER: 80W
Air output: 60 L/Min
PRESSURE (Mpa / kPa): 0.03mpa
AIR OUTLET(S): 10 Outlets
DIMENSION (L x W x H) :29cm x 20cm x 18cm
CORD LENGTH: 145cm

Micro regulator is available in AC/DC operation mode
The air output can be adjusted at ones desire
Multi-level muffling design, low noise, large air output and high pressure
Intelligent micro computer control system and protective circuit of battery
Battery can be charged when the pump is connected with AC power supply
Change automatically to DC when AC if off
The DC power can work up to8 hours when the AC power turns off

Technical Specifications

VOLTAGE / FREQUENCY: 220V  240V & 50/60Hz
POWER: 28W
Air Output : 60 L/Min x2
PRESSURE (Mpa / kPa) : 0.025mpa

RESUN LP-60
Ideal for adding oxygen into aerobic wastewater systems in non-sewered areas. Also used for pond aeration into a fish pond which is very important for fish health, particularly in densely stocked koi fish ponds and in the summer months when oxygen levels decline. Fish will become visibly more active in an oxygen-rich pond

Installation hints:
Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers.

FEATURES
Electromagmetic linear diaphragm technology Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump cast aluminium body with Automatic thermal cut-out overload protection
Must be set-up above the water level


Voltage/Wattage: 240V / 100W
Cable length: 1.5m
Max pressure: 0.037MPa
Max air output: 4200L/hr (70 Litres/minute)
Air pump outlet diameter: 20mm


Important: Rated IPX4 (meaning - Should be placed in a low dust environment but will tolerate rain and light sprinkling)
Maximum water depth for placed airstones or air diffuser: 3.5m
Supplied with a plastic 14 outlet manifold to suit 4mm silicon air line
Air Pump dimensions: 245mm(L) x 205mm(W) x 210mm(H)
Weight: Air Pump: 5.45kg. Cartoned pump: 6.3kg

RESUN LP-200
Ideal for adding oxygen into aerobic wastewater systems in non-sewered areas. Also used for pond aeration into a fish pond which is very important for fish health, particularly in densely stocked koi fish ponds and in the summer months when oxygen levels decline. Fish will become visibly more active in an oxygen-rich pond

Installation hints:
Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers.

FEATURES
Electromagmetic linear diaphragm technology Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump cast aluminium body with Automatic thermal cut-out overload protection
Must be set-up above the water level

Brand: RESUN
Type: LP 200
Voltage: 220 - 240 V
Frequency: 50/60 Hz Watt: 200Watt
Wind Output: 250L / minute
Pressure: 0.045MPa
Maximum Water Depth: 4 meters
Wind Separator: 33 Branches

Features
Low noise. 
Special DC model, microcontroller. 
Supply controller for air flow control. 
High performance and exceptional performance
Low power consumption, low cost. 
Continuous operation and long service life. 

Purpose: 
To provide oxygen in ponds aquariums and ponds. 
It is used as necessary accessories for food freezers, liquids and washing machines. 
When transporting fish for work without electricity. 
Used to supply air to medical instruments and equipment. 

Technical Specifications: 
Voltage: 220 V 
Power: 165 W 
Productivity: 185l / min 
Pressure: 35 kPa 
Operating time DC: 8 hours
Weight: 20Kg 
NOTE
This compressor is ideal for supplying air to ponds, ponds, aquarium systems up to 30,000 liters. 
When a power outage occurs, the compressor automatically runs on battery power.

The main advantage of compressors from SunSun is charging, which does not require additional cables and connectors, charging is done continuously during the operation of the device. The design of this device helps simplify and make it more reliable. In case there are 3 indicators indicating the status of the device. The red light indicates the operation of the AC outlet, the yellow indicates battery charge, the green operation of the battery. Thanks to the use of compressors, you do not have to worry about the life of the fish, even during the old transportation or when the electricity is cut off. In the kit there are distributors for 10 outputs for standard compressor hose connections with 4 mm, and two clamps for clamping. Microcomputer control, AC / DC charge automatically. Length of work and long life. Apply for aquaculture, transporting live aquatic products, aquariums, chemical and medical treatments.

FEATURES

• Compact structure and pretty design.

• Reciprocating compressor, energy saving and high efficiency;

• No need to put on oil, non-pollution, high pressure and big output.

• Suspension shock damper system and multistage muffler design, low noise.

• Internal heat dissipation and high waterproof design, can work 24hours.

 
Technical Specifications

Model  HJB-550   
Voltage  220V/50HZ
Power 420W
Rated Pressure 20kpa 
Pressure 50kpa
Output 500L/min
Weight 24kg
Dimensions L×W×H 420×277×270mm 

The case is made of high-quality ZL aluminum alloy withstreamline design, heat-dissipation is more effctive. Driven by electrical magnetic motor, adpot straight-line reciprocal motion to produce air and more reasonalbe in structure. Adopt SF3 new type wearable material for the cylinder and piston, which is of low power consumption, large air output and high ari pressure. Non-oil lubricating design, the compressed air is purified. Phosphorize disposittion,regular coloring and adhesive strength.

Model: HJB 280                                                             
Power-max: 230W                                                         
Rated Current: 1.7A                                                       
Flow-max: 280l/min                                                       
Pressure-max: 50kpa                                                      Rated pressure: 20kpa  
Rated Flow: 200l/min                                                   

Additional Information:

• Delivery Time: 1 day

FEATURES

 Compact structure and pretty design.

 Reciprocating compressor, energy saving and high efficiency;

 No need to put on oil, non-pollution, high pressure and big output.

 Suspension shock damper system and multistage muffler design, low noise.

 Internal heat dissipation and high waterproof design, can work 24hours.

Technical Specifications

Model HJB-400     
Voltage  220V/50HZ
Power 300W 
Rated Pressure 20kpa 
Pressure 48kpa
Output 400L/min
Weight 21kg
Dimensions L×W×H 420×277×270mm 

Additional Information:

• Delivery Time: 2 days

Additional Information:

• Item Code: HAP-100NEW
• Delivery Time: 2 Days

Special artificial rubber to keep a steady air output and pressure.
Adveanced air-compressing system, damping system and multilevel muffler which is extremely low in noise. .
The stucture is reasonable and compact,it is long service life and acquiring best effect with lowest energy consumption. .
Aluminum alloy case,quick in heat-dissipaion and easy to move. 
Specifications: .
Model: HAP -60
Power: 55W.
Voltage: 110-115/220-240V.
Output: 60 litres per minute .
Noise: 40dB.

Special artificial rubber to keep a steady air output and pressure.
Adveanced air-compressing system, damping system and multilevel muffler which is extremely low in noise.
The stucture is reasonable and compact,it is long service life and acquiring best effect with lowest energy consumption.
Aluminum alloy case,quick in heat-dissipaion and easy to move. 
Specifications: 
Model: HAP -120
Power: 125W.
Voltage: 110-115/220-240V.
Output: 120 litres per minute .
Noise: 45dB.
Max.Pressure: >0.038Mpa